HL460/600 Dual - The HL460/600 Dual series of compressors are designed especially for fire, rescue, marine, dive and military applications where absolute redundancy is required. The system consists of two independent compressor and filter groups with a maximum operating pressure of 5000 PSI in one sound attenuated cabinet. This gives the added benefit of a lower electrical starting load for a high capacity machine. NEVER be without air again! In slow times or when service is required on one unit, just run the other compressor. When the load picks up and the service is complete, run them both! Each features it's own independent tri-chem air filtration system.

Standard equipment on the HL460/600 includes:

  • All Stainless Steel inter and after coolers for superior corrosion resistance
  • Moisture Separators and Triplex Air filters or each compressor
  • Automatic Condensate Drain system
  • Hour Meters
  • External Oil Level Indication
  • Powdercoat Sound Attenuated Cabinet
  • Quad Filler Hoses and SCUBA or SCBA fittings

Download a Flier

Model
Charging
Rate
SCFM**
Free
Air
Delivered
HP
Driver
L-W-H
Inches
Wt.
lb.
HL460 Dual
18
15.6
5.5
Electric
Three Phase
230/440 VAC
34.4x34x53.2"
632 lbs
HL600 Dual
21.6
18
7.5
Electric
Three Phase
230/440 VAC
34.4x34x53.2"
676 lbs
Options Available

HL Airsafe
Electronic filter control that monitors and indicates filter saturation and gives a 3 stage "advanced warning" on its LED display when the filter should be changed. HL Airsafe automatically switches the compressor off if the cartridge is saturated..
Interstage Gauges
For indication of pressure at each cylinder (standard on SuperSilent Series)
Temperature Control
An automatic shutdown to prevent overheating damage (standard on SuperSilent Series)
Oil Level Control
An automatic shutdown to prevent damage from lack of lubrication (standard on SuperSilent Series)


Home - HL220/270 Silent - HL220 Nitrox - HL220/270 SuperSilent - HL600 SuperSilent - Portables